KVCC Information Technologies

Audio Visual Equipment Usage Instructions

If your classroom is equipped with a data projector, computer, and VCR.

To view a video:

• Locate the remote control for the data projector and press the on button. It will take less that one minute for the lamp to warm up. You will see a 30 to 0 countdown before the image is displayed.
• Pull down the projection screen.
• Turn on the VCR and insert your video.
• Press the play button or rotate the round shuttle.
• To adjust the volume for the VCR use the volume knob on the speakers sitting on top of the VCR.

NOTE: If the video does not project onto the projection screen - locate the mode button on the data projector remote and press it slowly one or more times until the video mode displays.

To view the computer:

• Locate the remote control for the data projector and press the on button. It will take less that one minute for the lamp to warm up. You will see a 30 to 0 countdown before the image is displayed.
• Pull down the projection screen.
• To adjust the volume for the computer, use the volume knob on the computer speakers or the volume icon in the system tray on the computer.

NOTE: If the monitor display does not project onto the projection screen - locate the mode button on the data projector remote and press it slowly one or more times until the computer monitor displays.

If you have any problems with the equipment:

• At Arcadia Commons Campus, stop by a computer lab located on the second floor in Anna Whitten Hall and Center for New Media during normal lab hours or call 373-7925.
• At Texas Township Campus, stop by Media Services in 8240 near Printing Services or call 488-4216.
  

Please remember that AV requests must be submitted at least 24 hours in advance.