Kalamazoo Valley AV Equipment Usage Instructions

 To view a video:

• Locate the remote control for the data projector and press the on button.  It will take less that one minute for the lamp to warm up.  You will see a 30 to 0 countdown before the image is displayed.

• Pull down the projection screen. 

• Turn on the VCR and insert your video. 

• Press the play button or rotate the round shuttle.

• To adjust the volume for the VCR use the volume buttons on the Data Projector remote.

NOTE:  If the video does not project onto the projection screen - locate the mode button on the data projector remote and press it slowly one or more times until the video mode displays. 

 To view the computer:

• Locate the remote control for the data projector and press the on button.  It will take less that one minute for the lamp to warm up.  You will see a 30 to 0 countdown before the image is displayed.

• Pull down the projection screen.

• To adjust the volume for the computer, use the volume knob on the computer speakers.

NOTE:  If the monitor display does not project onto the projection screen - locate the mode button on the data projector remote and press it slowly one or more times until the computer monitor displays. 

If you have any problems with the equipment:

• At Arcadia Commons Campus, stop by a computer lab located on the second floor in Anna Whitten Hall and Center for New Media during normal lab hours or call 373-7814(AWH) or 373-7925(CNM).
• At Texas Township Campus, stop by Media Services in 8240 near Printing Services or call 488-4216.

Please remember that AV requests must be submitted at least 24 hours in advance.